Below I will compare the power, portability, and features of the Dewalt DCS575T1 and DCS575T2
Difference between Dewalt DCS575T1 and DCS575T2
The technical summary sheet for Dewalt DCS575T1 and DCS575T2
Design Comparison
These two machines are quite similar in size (11.89 x 11.5 x 15.4 inches), but their weight is different.
Electric saws are best known for some specific features such as good maneuverability and high precision. To achieve these qualities, electric saws need to be as light as possible.
While the weight of the DCS575T2 is about 14.5 pounds, the DCS575T1 model is significantly lighter, at only about 12.3 pounds. This is because the DCS575T1 is equipped with a monolithic aluminum motor block, which is inherently lighter than the theDCS575T2’s copper-phase aluminum motors.
The winner in this section is probably the DCS575T1.
Power Comparison
Both are equipped with non-spark engines. This type of motor has been shown to optimize cutting speed, durability, and noise reduction much better than traditional saw machine motors.
The top speed is 5800Rpm per minute, and the machine works exceptionally well. Due to the improved motor power and the integrated router, these machines’ cutting paths are often much more straight and beautiful than traditional saws.
DeWalt guarantees these two machines have a 47% superior performance compared to the old version DCS575. This means its maximum output has been improved from 1600 watts to 2456 watts – What an impressive number!
Many tests have shown that the DCS575T2 model is capable of cutting 2x industrial wood panels quickly. Also, for the DCS575T2, you can swap out a deeper saw up to 2 9/16 inch – enough to cut three boards in a row for the same cut. However, in general, the two are seeing similar levels of overall similarity in terms of engine.
Thus, no machine has advantage between Dewalt Dcs575t1 Vs Dcs575t2 in this round.
Features Comparison
The battery specifications of these two machines are similar. They are battery operated with 20 volts transparency and are both flex volt batteries.
The flex volt battery is a battery-powered by technology to improve performance and battery life. Specifically, these pin types allow changing voltage automatically for different task requirements. Thus, battery life is extended due to the efficient use of batteries.
When you buy either of these products, you get the same accessories and warranties. However, the most significant difference between the two machines is that the DCS575T2 comes with two spare batteries, while the number in the DCS575T1 comes with just one.
This redundancy can help prolong the life of the DCS575T2 if the power goes out. This feature is always handy for professional woodcutters.
The DCS575T2 clearly has a bigger advantage in this additional accessories category.
Quick Rundown Of Dewalt DCS575T1
- Runtime: DEWALT 7 1/4 circular saw delivers up to 339 cuts per charge in 2-inch x 4-inch SPF lumber
- The cordless circular saw has the depth of cut 2-9/16 inch
- 60V MAX* 7-1/4-inch brushless compact circular saw delivers the power of corded with portability and convenience of cordless
- Electronic brake stops the blade after the trigger is released
Easy to edit
Easily change the angle of the saw
Easily cut wooden bars in 1 shot
Safe stop system
Clamp routine during cutting[/i2pros][i2cons]Short use time
The cutting lamp is not clear
[/i2cons][/i2pc]
Quick Rundown Of Dewalt DCS575T2
- DEWALT 7 1/4 circular saw delivers up to 339 cuts per charge in 2-inch x 4-inch pine
- The cordless circular saw has the depth of cut 2-9/16 inch
- 60V MAX* 7-1/4-inch Brushless motor delivers the power of corded with the portability and convenience of cordless
- Electronic brake stop the blade after the trigger is released
Long use time
Easily change the angle of the saw[/i2pros][i2cons]Heavy
Cut indicator light is not clear[/i2cons][/i2pc]
Conclusion
So from the above analysis of Dewalt DCS575T1 and DCS575T2, you can see that each product has its strengths and weaknesses.
If you are a professional woodcutter and have used a lot of electric saws for a long time, DCS575T2 might be the optimal choice for you. Conversely, you are a non-professional and only use it when you need, DCS575T1 may be the more suitable choice. So the decision will be based on your preferences and budget.
After all, the above article is for information and analysis purposes only. We hope you can make the right buying decision.
